Aluma FAQs

Made in the USA

2716 Spence Street Lufkin, Texas 75904
1-800-346-6966

1. Can an individual buy direct from the factory?

   Aluma only sells through dealers, we do not retail through
the factory. Please use the dealer locator to find the dealer
nearest you. If you are having difficulties finding a dealer feel free
to contact us directly.

2. Is the warranty transferable if a trailer is sold to another
     individual?

    No, the warranty is effective for the original owner only. If
purchasing a used trailer from a dealership any warranty offered
is at the discretion of the dealer and is their resposibility.
If any additional information is needed on our warranty policy
please contact us.

  3. What is the wheel lug nut torque and how often do I
      check it?

Please torque in a 3 stage process - always tighten in a "star" pattern. Tighten one nut, then move across to the next & etc., until all are tight in this "star" pattern.

1st stage, torque all lug nuts to 20-25 lbs
2nd stage, torque all lug nuts to 50-60 lbs
3rd stage, torque all lug nuts to 95-100 lbs

95-100 lbs is the recommended torque for these stainless steel lugs on the aluminum rims.

Please check lug torque at 50 miles, at 200 miles, and every 500 to 1,000 miles thereafter.

4. How often should the axle bearings be lubricated? What type of grease is recommended?

Bearings should be lubricated every 12 months or 12,000 miles, whichever comes first. To prepare the hubs for lubrication, please see the Dexter Axle owners manual that came with your trailer.

GREASE:
Thickener Type ............. Lithium Complex
Dropping Point ................215*C (419*F)
Consistency ...................NLGI No. 2
Additives......................EP, Corrosion & Oxidation Inhibitors
Viscosity Index............ 80 Minimum

APPROVED SOURCES:
Mobil Oil......Mobilgreese HP, Mobilith AW2
Exxon/Standard...... Ronex MP
Pennzoil Product Co..Preminum Wheel Bearing Grease 707L
(taken from Dexter Azle “Operation Maintenance Service Manual”)

5. What should I use to clean the aluminum on the trailer?

We recommend a product that we use at the factory called Saber, made by Hotsy. You can also use any type of aluminum polish or cleaner. For painted aluminum sheeting on enclosed trailers, any non-abrasive, mild automotive cleanser can be used (car wash soap, i.e.).

6. What is the recommended tire pressure?

Please check the side of the tire for the manufacturer's recommended pressure.

7. What is the wiring schematic on an MCT?

We have an easy to follow wiring schematic that will explain how the wiring will work. http://alumaklm.com/pdf/MCTharness.pdf